Sheppard in Photos

366th TRS electrical systems course

366th Training Squadron electrical systems apprentice course instructor Petty Officer 1st Class Douglas Morgan's class practices to maneuver around objects while climbing up a utility pole to the cross arm where they will work with high voltage power lines. Morgan’s class is in block seven of seven and scheduled to graduate Feb. 8. (U.S. Air Force photo by Alan R. Quevy)

362nd TRS crew chief course

Airman Gavin Murphy, left, and Airman 1st Class David Morfin, 362nd Training Squadron crew chief apprentice course students, service the outboard hydraulic accumulator on a B-52 Stratofortress at Sheppard Air Force Base, Texas, Jan. 23, 2018. The hydraulic accumulator dampens pressure surges on the B-52 hydraulic system. Murphy and Morfin are in block seven of seven and scheduled to graduate Feb. 2. (U.S. Air Force photo by Alan R. Quevy)

366th TRS electrical systems course

Seaman Recruit Sergio Rivera, 366th Training Squadron electrical systems apprentice course student, adjusts the “Seabee” flag while climbing to the top of a utility pole at Sheppard Air Force Base, Texas, Jan. 24, 2018. The Seebees are the construction battalion of the Navy and have the motto “Construimus, Batuimus" or "We Build, We Fight." Rivera is in block seven of seven and scheduled to graduate Feb. 8. (U.S. Air Force photo by Alan R. Quevy)

366th TRS electrical systems course

Seaman Apprentice Alexander Ossorio, 366th Training Squadron electrical systems apprentice course student at Sheppard Air Force Base, Texas, installs a support arm Jan. 24, 2018, that will be used to insulate high voltage wires. Ossorio is in block seven of seven and scheduled to graduate Feb. 8. (U.S. Air Force photo by Alan R. Quevy)

366th TRS electrical systems course

Seaman Apprentice Anthony Cook, 366th Training Squadron electrical systems apprentice course student, climbs to the top of a 25-foot utility pole as part of his initial qualification before working with overhead distribution systems at Sheppard Air Force Base, Texas, Jan. 24, 2018. Cook is in block seven of seven and scheduled to graduate Feb. 8. (U.S. Air Force photo by Alan R. Quevy)

366th TRS electrical systems course

Students in 366th Training Squadron electrical systems apprentice course instructor Petty Officer 1st Class Douglas Morgan's class practices to maneuver around objects while climbing up a utility pole to the cross arm where they will work with high voltage power lines. Morgan’s class is in block seven of seven and scheduled to graduate Feb. 8. (U.S. Air Force photo by Alan R. Quevy)

362nd TRS training

Brandon Cleary, 362nd Training Squadron instructor shows his crew chief apprentice class how to perform a tire inspection prior to installation on an aircraft. The tire inspection consists of checking for any wear and tear, bearings, tire dates and any visible damage. Cleary’s class is in block five of seven and scheduled to graduate Feb. 21. (U.S. Air Force photo by Alan R. Quevy)

366 TRS

Petty Officer 1st Class Douglas Morgan, 366th Training Squadron electrical systems apprentice course instructor, teaches Seaman Skylar Knight 366 TRS electrical apprentice course student, how to get into a working position at the top of a utility pole at Sheppard Air Force Base, Texas, Jan. 23, 2018. Knight is in block seven of seven and scheduled to graduate Feb. 8. (U.S. Air Force photo by Alan R. Quevy)

366 TRS

Petty Officer 1st Class Douglas Morgan, 366th Training Squadron electrical systems apprentice course instructor, teaches his class to buddy climb a utility pole with another person at Sheppard Air Force Base, Texas, Jan. 23, 2018. Buddy climbing is used to maximize safety during the climb. Morgan’s class is in block seven of seven and scheduled to graduate Feb. 8. (U.S. Air Force photo by Alan R. Quevy)

362nd TRS crew chief course
PHOTO DETAILS  /   DOWNLOAD HI-RES 10 of 18

Airman Wesley Boykin, 362nd Training Squadron crew chief apprentice course student, removes and installs the liquid oxygen converter on an A-10 Thunderbolt at Sheppard Air Force Base, Texas, Jan. 23, 2018. The liquid oxygen converter holds all the oxygen for the pilot while in flight. Boykin is in block four of six and scheduled to graduate March 9. (U.S. Air Force photo by Alan R. Quevy)

362nd TRS crew chief apprentice course
PHOTO DETAILS  /   DOWNLOAD HI-RES 11 of 18

Airman 1st Class Kezrion Mims, 362nd Training Squadron crew chief apprentice course student, installs a new battery on a A-10 Thunderbolt at Sheppard Air Force Base, Texas, Jan. 23, 2018. Mims is in block four of six and scheduled to graduate March 9. (U.S. Air Force photo by Alan R. Quevy)

362nd TRS crew chief course
PHOTO DETAILS  /   DOWNLOAD HI-RES 12 of 18

Karl Abts, 362nd Training Squadron crew chief apprentice course instructor, shows his class how to ensure the X-valve on a C-130 Hercules is in the closed position at Sheppard Air Force Base, Texas, Jan 23, 2018. The X-valve is used to jettison fuel from the aircraft during flight when necessary. It is also the last valve in the fuel system and must be closed prior to fueling. Abts’ class is in block seven of 10 and scheduled to graduate Feb. 21. (U.S. Air Force photo by Alan R. Quevy)

362nd TRS crew chief course
PHOTO DETAILS  /   DOWNLOAD HI-RES 13 of 18

Airman Joshua Chapman and Airman 1st Class Brendan Nguyen, 362nd Training Squadron crew chief apprentice course students remove an A-10 Thunderbolt engine shroud for maintenance at Sheppard Air Force Base, Texas, Jan. 23, 2018. The engine shroud covers and protects the major engine components. Chapman and Nguyen are in block six of six and scheduled to graduate Feb. 7. (U.S. Air Force photo by Alan R. Quevy)

362nd TRS crew chief course
PHOTO DETAILS  /   DOWNLOAD HI-RES 14 of 18

Airman 1st Class Artur Troxell, 362nd Training Squadron crew chief apprentice course student, services the hydraulic pressure system on an A-10 at Sheppard Air Force Base, Texas, Jan. 23, 2018. The Hydraulic system controls all the movement of the aircraft while in flight. Troxell is in block five of six and scheduled to graduate Feb. 27. (U.S. Air Force photo by Alan R. Quevy)

362nd Training Squadron
PHOTO DETAILS  /   DOWNLOAD HI-RES 15 of 18

Airmen Trey Clolinger, Sidney Rozas, Jeremy Harris and Zachary Guinn, 362nd Training Squadron students at Sheppard Air Force Base, Texas, service the oxygen on a C-130 Hercules Jan. 23, 2018 that is used by pilots and crew during flight. Clolinger, Rozas, Harris and Guinn are in block nine of 10 of the C-130 crew chief apprentice course and scheduled to graduate Feb. 5. (U.S. Air Force photo by Alan R. Quevy)

362nd TRS crew chief course
PHOTO DETAILS  /   DOWNLOAD HI-RES 16 of 18

Tech Sgt. Kevin Finegan, 362nd Training Squadron instructor, provides his class hands-on experience with the major components of a C-130 Hercules nose landing gear after covering the material in a classroom lecture at Sheppard Air Force Base, Texas, Jan. 23, 2018. Finegan’s C-130 crew chief apprentice course class in block six of 10 and scheduled to graduate March 5. (U.S. Air Force photo by Alan R. Quevy)

363rd TRS armament apprentice course
PHOTO DETAILS  /   DOWNLOAD HI-RES 17 of 18

Tech Sgt. Rattanak Nhok, 363rd Training Squadron A-10 Thunderbolt armament instructor, shows his class the areas that need to be checked during the safe-for-maintenance inspection at Sheppard Air Force Base, Texas, Jan. 19, 2018. The safe-for-maintenance inspection is a required task to be accomplished before any maintenance can be performed on the aircraft. Nhok’s class is in block six of 13 and scheduled to graduate March 23. (U.S. Air Force photo by Alan R. Quevy)

363rd TRS armament apprentice course
PHOTO DETAILS  /   DOWNLOAD HI-RES 18 of 18

Tech Sgt. Miguel Garza, 363rd Training Squadron instructor, walks his armament apprentice class through a familiarization of the A-10 Thunderbolt gun system at Sheppard Air Force Base, Texas, Jan. 19, 2018. Garza’s class is in block nine of 10 and scheduled to graduate Feb 20. (U.S. Air Force photo by Alan R. Quevy)

SHEPPARD AIR FORCE BASE, Texas — This week's Sheppard in Photos highlights Airmen in Training in the 362nd Training Squadron's crew chief apprentice course, 363rd TRS armament apprentice course, and 366th TRS electrical systems course at the 82nd Training Wing.