180502-F-KC646-0001

Students from the 362nd Training Squadron aerospace apprentice course learn how to operate a C-130 loading ramp at Sheppard Air Force Base, Texas, May 2, 2018. Before transitioning into the operational Air Force, these students must master theoretical and practical principles of aircraft electrical and mechanical maintenance. (U.S. Air Force photo by Senior Airman Kevin Clites)

Photo Details / Download Hi-Res
180502-F-PQ209

Airmen from the 362nd Training Squadron F-16 tactical aircraft maintenance course wait for their turn to pump hydraulic fuel into the brake accumulator at Sheppard Air Force Base, Texas, May 2, 2018. The students were given basic information on the engine and flight controls before beginning the hands on experience. (U.S. Air Force photo by Airman Madeleine Remillard)

Photo Details / Download Hi-Res
180502-F-YT646-0037

A German air force instructor pilot gives a tour to new Euro-NATO Joint Jet Pilot Training program student pilots at Sheppard Air Force Base, Texas, May 2, 2018. The ENJJPT program is the only internationally manned and managed pilot training program in the world. A total of 14 NATO countries participate in this unique program. These countries include, Belgium, Canada, Denmark, Germany, Greece, Italy, The Netherlands, Norway, Portugal, Romania, Spain, Turkey, The United Kingdom and the United States of America. (U.S. Air Force photo by Airman 1st Class Pedro Tenorio)

Photo Details / Download Hi-Res
180502-F-KC646-0001

Instructor Ricardo Suggs helps students from the 362nd Training Squadron aerospace apprentice course to operate a C-130 loading ramp using schematic data at Sheppard Air Force Base, Texas, May 2, 2018. Suggs must ensure his students can accurately interpret maintenance data reports and technical orders. (U.S. Air Force photo by Senior Airman Kevin Clites)

Photo Details / Download Hi-Res
180502-G-YT646-0065

Second Lt. Nathanael Zilweger, 80th Flying Training Wing Euro-NATO Joint Jet Pilot Training Program student pilot, puts away his gear at Sheppard Air Force, Base, Texas, May 2, 2018. The ENJJPT program teaches pilots how to fly in training jets like the T-38 Talon. Once completed with the program though, these pilots will be assigned to specific aircraft they fly. (U.S. Air Force photo by Airman 1st Class Pedro Tenorio)

Photo Details / Download Hi-Res
180502-F-YT646-0157

362nd Training Squadron C-130 crew chief apprentice course students stand in the cargohold of a C-130 Hercules at Sheppard Air Force Base, Texas, May 2, 2018. The cargobay door of a C-130 can be opened two ways, electrical or manual. If opened manually it would take an average of 20 minutes to open both doors. On the other hand, it only takes a few seconds if opened electrically. (U.S. Air Force photo by Airman 1st Class Pedro Tenorio)

Photo Details / Download Hi-Res
180502-F-PQ209

Airman Nicholas Yurchak, Airman 1st Class Josh Hepfer and Airman Noah Avery, students from the 363rd Training Squadron aircraft armament system apprentice course, work to remove and install an MAU-12 bomb rack at Sheppard Air Force Base, Texas, May 2, 2018. It is important for Airmen to be experts in this task to accurately deliver munitions to the target. (U.S. Air Force photo by Airman Madeleine Remillard)

Photo Details / Download Hi-Res
180502-F-KC646-0001

Capt. Jens Lundgreen-Nielsen, an instructor pilot from the Royal Danish air force, prepares for a flight at Sheppard Air Force Base, Texas, May 2, 2018. Lundgreen-Nielsen is participating in the Euro-Nato Joint Jet Pilot Training program at the 80th Flying Training Wing, which hosts 14 Nato nations at Sheppard. (U.S. Air Force photo by Senior Airman Kevin Clites)

Photo Details / Download Hi-Res
180503-F-PQ209

Airmen from the 362nd Training Squadron C-135 crew chief course were briefed on how to work with gaseous oxygen at Sheppard Air Force Base, Texas, May 3, 2018. Knowing how to work with gaseous oxygen and service the aircraft with breathable oxygen is a vital part in safely accomplishing the mission. (U.S. Air Force photo by Airman Madeleine Remillard)

Photo Details / Download Hi-Res
180503-F-YT646-0224

366th Training Squadron electrical power productions apprentice course students discuss how to fix one of the training generators at Sheppard Air Force Base, Texas, May 2, 2018. They are learning how to combine two generators to create a more efficient and powerful one. The generators are the same ones used during deployments and will support the mission by supplying electricity and power needed when out of country. (U.S. Air Force photo by Airman 1st Class Pedro Tenorio)

Photo Details / Download Hi-Res

Sheppard in Photos

Published May 3, 2018
82nd Training Wing Public Affairs

SHEPPARD AIR FORCE BASE, Texas --

180502-F-KC646-0001

180502-F-PQ209

180502-F-YT646-0037

180502-F-KC646-0001

180502-G-YT646-0065

180502-F-YT646-0157

180502-F-PQ209

180502-F-KC646-0001

180503-F-PQ209

180503-F-YT646-0224