366th Training Squadron water and fuels system maintenance repair course

Airmen from the 366th Training Squadron water and fuel system maintenance apprentice course make adjustments on a reverse osmosis water purification system at Sheppard Air Force Base, Texas, May 30th, 2018. This reverse osmosis treatment system is capable to purifying up to 1,500 gallons of ultra-pure water per hour. (U.S. Air Force photo by Senior Airman Kevin Clites)

Reveille Run 5k June 1, 2018

Members of the 366th Training Squadron stand at parade rest as they conduct accountability after completing the 5k Reveille Run at Sheppard Air Force Base, Texas, June 1, 2018. The 366th Training Squadron was voted as the unit that demonstrated the most comradery and wingmanship during the race. (U.S.Air Force photo by Senior Airman Kevin Clites)

366th Training Squadron water and fuels system maintenance repair course

Airmen from the 366th Training Squadron water and fuels system maintenance apprentice course inspect a sample of water at Sheppard Air Force Base, Texas, May 30, 2018. These airmen are performing their final progress check before graduating from the course. (U.S. Air Force photo by Senior Airman Kevin Clites)

Reveille Run 5k June 1, 2018

A Seaman from the 366th Training Squadron checks his time as he crosses the finish line after a 5k Reveille Run at Sheppard Air Force Base, Texas, May 30, 2018. The Center for Seabeas and Facilities Engineering train Seabeas in a Navy detachment that is integrated with the 366th TRS. (U.S. Air Force photo by Senior Airman Kevin Clites)

366th Training Squadron water and fuels system maintenance repair course

A Seaman from the 366th Training Squadron practices soldering copper joints at the water and fuel system maintenance apprentice course at Sheppard Air Force, Base, Texas, May 30, 2018. To properly solder a pipe, joint surfaces must be cleaned, deburred, and protected from oxidation with flux. After soldering wire is melted against a heated metal, it can form a reliable bond between a joint and fitting. (U.S. Air Force photo by Senior Airman Kevin Clites)

366th Training Squadron water and fuels system maintenance repair course

Airman Heath Hood, a 366th Training Squadron water and fuels system maintenance student, calibrates chemicals to generate clean drinking water at Sheppard Air Force Base, Texas, May 30, 2018. Hood, native of Double Springs, Ala., graduated May 31, 2018. (U.S. Air Force photo by Airman Madeleine E. Remillard)

366th Training Squadron water and fuels system maintenance repair course

Seaman Recruit Marlene Sanchez, a 366th Training Squadron water and fuels system maintenance student, cleans a copper pipe to solder for a water heater. Sanchez, a Texas native, has already graduated the heating, ventilation and air conditioning course and is now in block two of the WFMS course. (U.S. Air Force photo by Airman Madeleine E. Remillard)

366th Training Squadron water and fuels system maintenance repair course

Seaman Ahmed Jamjalloh, a 366th Training Squadron water and fuels system maintenance student, repairs a copper pipe for a water heater at Sheppard Air Force Base, Texas, May 30, 2018. Jamjalloh, a Virginia native, looks forward to beginning his job at his first base in Gulfport, Miss. (U.S. Air Force photo by Airman Madeleine E. Remillard)

Sheppard in Photos

Published June 1, 2018
82nd Training Wing Public Affairs

SHEPPARD AIR FORCE BASE, Texas – This week's Sheppard in Photos features fuels and water system maintenance course apprentices at the 366th Training Squadron and Airmen participating in Sheppard's Reveille Run, a 5k event that was part of the base's Armed Force's Day Celebration June 1.